|
GrainAir Tubes
GrainAir Tubes are made of 18 gauge perforated galvanized steel. The Tubes come in telescoping eight foot sections and can be ordered with two (GT200), three (GT300), or four (GT400) sections to accommodate differed sized bins. All these GrainAir Tubes come with a cap assembly.
|
| |
|
|
|
|
Installation Instructions
|
| |
| |
| |
| |
|
|
|
|
Flat Bottom Bins
GrainAir Tubes work to cool your flat bottom bins and won't interfere with your clean out operation either. By using a retractable base the system allows you to support the roof ring and GrainAir Tube while unloading. When you wish you do your final clean out, simply loosen the base set screw and retract the base into the GrainAir Tube, and out of the way of your sweep or vac!
|
|
|
Hopper Bottom Bins
The GrainAir Tube system is also set up to work well in your hopper bottom bins. The square tubing cross brace runs across the hopper bottom and supports a magnetic base for the GrainAir Tube. This base helps support the GrainAir Tube and roof ring during unload and acts as a shear pin as the last of your grain empties from the hopper, preventing damage to the GrainAir Tube.
|
|
|
|
Grain Piles/Sheds
Using a Free Standing Base, you can use GrainAir Tubes to cool your grain stored in quonsets, sheds, grain rings or grain piles. Simply place the GrainAir Tube where you want it and fill your storage area.
The GrainAir Tubes can also be easily removed from the storage area when unloading as you simply unload to the base, tip the Tube and move it to the side.
Easy and effective grain cooling for all your storage needs.
|
| |
|
|
|
Aeration Booster
Aeration Booster The Aeration Booster is a GT 96 tube with a cap assembly that can be hung at the top of full floor and tube aeration bins. This product is used to improve the convection, increase efficiency, and prevent crusting at the peak of these aeration bins.
|
|
|
|
|
|
.jpg)
